Chlorine generator for water purification reagent filters

Designed for Ecomix softeners and softeners for chlorine disinfection systems with a volume of 12 to 200 liters, this probe is the ideal solution to ensure the stable and efficient operation of your water treatment systems.

Operation

Connecting the probe to your water softener is a simple and quick process. Begin by connecting the probe to the salt supply line to the water softener using the necessary adapters. Make sure you know the exact volume of resin in your softener - refer to the instructions for this.

After that, disconnect the generator plug and open it by unscrewing the screw in the upper part of the box. There is a trimmer on the generator board that you can adjust to suit your needs. The trimmer allows you to set a timer from 2 to 70 minutes, and each minute allows you to disinfect up to 1 liter of resin. After adjusting the trimmer, close the box and connect the plug.

How does it work?

The system is ready for operation. When filling, the rinse system automatically checks for salt water by energizing the probe for the time you set. After this time, the generator automatically stops for 4 hours. At the end of this period, the system is ready for operation again, providing a continuous cycle of effective disinfection and water softening.

This probe ensures the uninterrupted operation of your water softeners, allowing you to easily monitor the disinfection process and provide high quality water for your home. Invest in reliability and efficiency with this probe for Ecomix softeners and chlorine disinfection systems.